Home Categories Send inquiry

10inch diamond grinding wheel to be fitted on single head floor grinders for grinding concrete floors

Product Introduction

Diameter of the 10inch diamond grinding wheel is 250mm which brings the maximum output of 250mm working area.
20pcs of rectangular segments, segment size 40x10x10mm.
Besides the center hole, there are 8 countersink holes. With these holes, the grinding wheel can be mounted to most single head floor grinding machines conveniently.
Blue color for hard bond segments for soft concrete;
Green color for medium bond segments for medium hard concrete;
Red color for soft bond segments for hard concrete.
Available grits: 6#,16#,30#, 50#, 70#, 100#, 120#, 200#, 400#.
Mainly used on 250mm single head floor grinders like Blastrac, EDCO, SPE, MK, etc. for coating removal, lippage removal, or for the initial steps in concrete polishing procedures.

Product Advantages

Z-LION 10inch diamond grinding wheel is designed to be fitted on single head floor grinding machines for concrete floor grinding. The special features of the tool are as follows:
High quality diamond is used in the matrix of segments to make the tool with good cutting/grinding capacity.
Diamond segments are hot-pressed and professionally welded onto the metal base. Density of segments is reasonable and balance of the tool is good so extend the lifetime of the tool.
Diamond segments can be changed to arrow shape, rhombic shape etc. And number of segments can be 10, 16, 20 or made as per demand. When there are fewer segments the grinding wheel is more aggressive and cuts faster; when there are more segments it works more smoothly and lasts longer. You can always get the right tool for your job.
Besides the center hole and countersink holes, more holes can be drilled onto the metal base to make the grinding wheel fit for more floor grinding machines.

Product name ZL-MP
Diameter
10"(250mm)
Number of segments 20
Segment 40x10x10mm
Material Metal bond diamond
Bond
Soft,Medium,Hard
Grit 6#,16#,30#, 50#, 70#, 100#, 120#, 200#, 400#
Connection Blastrac

Product Applications

10inch diamond grinding wheels are mainly used on 250mm single head floor grinding machines for concrete surface preparation and restoration. To polish concrete floor of warehouse, parking lot, workshop, supermarket etc.


  • 10inch diamond grinding wheel to be fitted on single head floor grinders for grinding concrete floors Related Video: